Error Code PC1
The washer's clutch moved but did not reach the correct position.
Moderate
Address soon - your appliance may not work properly
Also displayed as: PC1
What This Means
Clutch error determined after clutch movement occurred; Clutch position sensor failure
What actually causes this:
The clutch mechanism is worn or jammed, preventing it from properly engaging.
First Thing to Check
Unplug the washer for 60 seconds, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Check the clutch motor and position sensor
- 2
2. Verify the clutch mechanism moves freely
- 3
3. Replace clutch assembly if faulty
Other Error Codes for WA51A5505AP
The washer's main computer chip has malfunctioned.
The washer's main computer chip has malfunctioned.
The washer's main computer chip has malfunctioned.
The drying heater has an electrical problem.
The washer has detected a water leak somewhere in the system.
The laundry load is uneven and the washer cannot spin safely.
The washer detected too many soap bubbles and is working to remove them.
The washer's vibration sensor board has detected a problem.