Error Code 8CA1
The external vibration sensor board may have a loose wire.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8CA1
What This Means
Wire connections to external MEMS PBA are disconnected or loose
What actually causes this:
A wire connector to the vibration sensor has come unplugged from vibration.
First Thing to Check
Unplug the washer for 60 seconds, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Check the wire connections if there is an external MEMS PBA
- 2
2. Replace if necessary: MEMS PBA first, then Main PBA
Other Error Codes for WA52A5500AP
The washer's vibration sensor may be faulty.
The washer's vibration sensor may be faulty.
The control panel and main circuit board cannot talk to each other.
The washer lid is not closing or locking properly.
The water heating element has an electrical problem.
The washer is overfilling with water beyond the safe level.
The washer cannot read the drying temperature correctly.
A drying system temperature sensor is not working correctly.