Error Code 8CA2
The washer's position sensor thinks the machine is not level.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8CA2
What This Means
Washer is not in horizontal level; MEMS PBA set position is faulty
What actually causes this:
The washer is sitting on an uneven floor or the leveling legs need adjustment.
First Thing to Check
Place a level on top of the washer and adjust the feet until the machine is perfectly level.
Parts Involved
How to Fix
- 1
1. Check that the washer is in horizontal level
- 2
2. If level is correct, replace the MEMS PBA
- 3
3. If issue persists, replace the Main PBA
Other Error Codes for WA52A5500AP
The washer's vibration sensor may be faulty.
The washer's vibration sensor may be faulty.
The control panel and main circuit board cannot talk to each other.
The washer lid is not closing or locking properly.
The water heating element has an electrical problem.
The washer is overfilling with water beyond the safe level.
The washer cannot read the drying temperature correctly.
A drying system temperature sensor is not working correctly.