Error Code AC2
An internal circuit board is not communicating properly.
Moderate
Address soon - your appliance may not work properly
Also displayed as: AC2
What This Means
I/O Board communication failure with main PBA
What actually causes this:
A connector has come loose from vibration during spin cycles.
First Thing to Check
Unplug the washer for 60 seconds, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Check connector connections between I/O board and main PBA
- 2
2. Check for incorrect or loose connections
- 3
3. Inspect for faulty soldering
Other Error Codes for WA52A5500AV
The washer's vibration sensor is sending bad data.
An internal vibration sensor connection has failed.
The washer's position sensor thinks the machine is not level.
The washer's vibration sensor may be faulty.
The washer's vibration sensor may be faulty.
The washer's clutch moved but did not reach the correct position.
The washer's main computer chip has malfunctioned.
The washer's main computer chip has malfunctioned.