Error Code LC
The washer has detected a water leak.
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: LC
What This Means
Air hose is out of place and water leakage occurs during the spin cycle; Tub back at the safety bolts fixing part is broken; Water leakage at the front with foaming because of too much detergent; Connecting hose to the detergent drawer is connected incorrectly; Drain pump filter cover is engaged incorrectly; Water leakage at the drain hose; Duct condensing holding screws are worn; Nozzle-diaphragm engaged in opposite direction or rubber packaging omitted; Screws holding tub back and front in place fastened incorrectly; Leakage sensor is faulty
What actually causes this:
Using too much detergent creates excessive suds that overflow and trigger the leak sensor, or a drain hose connection has come loose.
First Thing to Check
Check around and under the washer for visible water. Reduce the amount of detergent you are using — use only HE (High Efficiency) detergent.
Parts Involved
How to Fix
- 1
1. Check if there is any alien substance in the Draining Bellows for natural draining
- 2
2. Check for alien substance in the DV Case
- 3
3. Remove the alien substance if found
- 4
4. Check if water leaks from the tub or from internal hose or connection part of the product's assembly
- 5
5. Check the laundry type and if the laundry load is unbalanced
- 6
6. If the drain motor is defective, replace the motor
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
Other Error Codes for WA52J8060AW
The washer's temperature sensor is giving wrong readings.
A specific internal water leak has been found.
There are too many soap suds in the washer.
The washer's vibration sensor board has a problem.
The washer's clutch position sensor is sending incorrect signals.
The washer's main computer chip has crashed.
The washer cannot detect how much water is in the tub.
The washer's motor cannot spin or is getting bad signals.