Error Code PC
Your washer's clutch mechanism is not working correctly.
Moderate
Address soon - your appliance may not work properly
Also displayed as: PC
What This Means
Clutch position cannot be detected; Clutch motor fault; Wiring issue to clutch motor
What actually causes this:
The internal clutch that switches the washer between agitating and spinning modes has failed or lost its position.
First Thing to Check
Unplug the washer for 1 minute, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Check clutch motor wiring and connections
- 2
2. Test clutch motor operation
- 3
3. Replace clutch motor or Main PBA if defective
Other Error Codes for WA52M7750AW
The vibration position sensor has failed.
The vibration sensor may be giving inaccurate readings.
Your washer's vibration sensor is not communicating properly.
Your washer cannot detect how much water is in the tub.
A vibration sensor wire has come loose inside the washer.
An internal power module in the washer is overheating.
The washer's WiFi module has lost its connection to the main board.
Your washer's door lock mechanism is not working correctly.