Error Code 8CA2
The washer's position sensor thinks the machine is not level.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8CA2
What This Means
Washer is not in horizontal level; MEMS PBA set position is faulty
What actually causes this:
The washer is sitting on an uneven floor or the leveling legs need adjustment.
First Thing to Check
Place a level on top of the washer and adjust the feet until the machine is perfectly level.
Parts Involved
How to Fix
- 1
1. Check that the washer is in horizontal level
- 2
2. If level is correct, replace the MEMS PBA
- 3
3. If issue persists, replace the Main PBA
Other Error Codes for WA54A7305AE
The washer's position sensor thinks the machine is not level.
The washer's vibration sensor may be faulty.
The washer's vibration sensor may be faulty.
The washer cannot detect the position of its internal clutch mechanism.
The motor's power module has overheated.
The washer's clutch moved but did not reach the correct position.
The washer's main computer chip has malfunctioned.
The washer's main computer chip has malfunctioned.