Error Code 8CB2
The washer's position sensor thinks the machine is not level.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8CB2
What This Means
MEMS PBA set position is faulty; Washer not level
What actually causes this:
The washer is not level or the internal position sensor has failed.
First Thing to Check
Place a level on top of the washer and adjust the feet until the machine is perfectly level.
Parts Involved
How to Fix
- 1
1. Check washer is level
- 2
2. Replace MEMS PBA if necessary
- 3
3. Replace Main PBA if issue persists
Other Error Codes for WA55A7300AV
An internal circuit board is not communicating properly.
The washer's vibration sensor is sending bad data.
An internal vibration sensor connection has failed.
The washer's vibration sensor may be faulty.
The washer's vibration sensor may be faulty.
The washer's clutch moved but did not reach the correct position.
The washer's main computer chip has malfunctioned.
The washer's main computer chip has malfunctioned.