Error Code 9C2
Your washer is getting too much electrical power
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: 9C2
What This Means
Over voltage supply to the washer; Unstable power supply in the home; Main PBA fault
What actually causes this:
There is a voltage surge or unstable power supply in your home's electrical system
First Thing to Check
Unplug the washer, wait a minute, then plug it back in — if the error returns, have an electrician check your outlet
Parts Involved
How to Fix
- 1
1. Check the consumer's power conditions and operating voltage with a tester
- 2
2. Connect a tester to the internal power terminals and check voltages
- 3
3. Check whether the home electrical supply is stable
- 4
4. If voltage is confirmed normal, replace the main PBA
Other Error Codes for WF45M5100AW
The incoming water is too hot for delicate cycles
The washer's door lock has a wiring or switch problem
The WiFi module lost its connection to the main board
Your washer can't tell how much water is inside
The washer's motor isn't spinning correctly
Your washer can't pump the water out
The control panel can't communicate with the main circuit board
The display screen lost its connection to the main board