Error Code bC2
A button on the control panel appears to be stuck or continuously pressed.
Moderate
Address soon - your appliance may not work properly
Also displayed as: bC2
What This Means
A button other than Power is continually pressed for more than 30 seconds; Deformation of an internal plastic injection part; Sub PBA assembling screw tightened too much; Main PCB relay fault; Main PBA switching IC on/off error
What actually causes this:
A button on the control panel is physically stuck down, or something is pressing against it.
First Thing to Check
Press each button on the control panel a few times to see if any feel stuck or do not spring back.
Parts Involved
How to Fix
- 1
1. Check contact between control panel buttons and their corresponding tact switches
- 2
2. Verify there is a gap between each control panel button and its micro switch — if no gap, error occurs after about 30 seconds
- 3
3. Check whether service PBA holding screws are fastened too much — loosen slightly if so
- 4
4. If main PBA switching IC on/off error occurred, replace main PBA
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
Other Error Codes for WW22N6850QX
The main computer and motor driver boards are not communicating.
The main board and motor inverter have lost communication.
The washer cannot detect the water level correctly.
The washing machine motor is not spinning properly.
The motor is drawing too much power or not reaching the right speed.
The washer cannot pump the water out.
The control panel and the main computer board are not communicating.
The washer's WiFi module is not communicating with the main board.