Error Code dC3
The automatic door opening feature is not working
Minor
Usually easy to fix - may resolve on its own
Also displayed as: dC3
What This Means
Touch button PBA defective; Sub PBA or touch button PBA not properly connected; Auto Door Open actuator defective; Door mechanism binding
What actually causes this:
The motor that automatically opens the door after a cycle for drying is stuck or has failed
First Thing to Check
Make sure nothing is blocking the dishwasher door from opening — check that the kick plate is not obstructing it
Parts Involved
How to Fix
- 1
1. Check connections for Auto Door Open actuator
- 2
2. Check Sub PBA and Touch PBA connections
- 3
3. If actuator operates but door doesn't open, check door hinge mechanism
- 4
4. If connections are secure, replace Auto Door Open actuator
- 5
5. If error persists, replace Control Panel Assembly
Other Error Codes for DDW24T998US
The dishwasher cannot pump the dirty water out
The water inside the dishwasher got dangerously hot
The touch panel and the control board are not communicating properly
The drying fan is not spinning fast enough
A control panel button appears to be stuck or held down
The main wash pump that sprays water is not working properly
The heating element is not warming the water properly
Water is leaking inside the base of the dishwasher