Error Code bC2
A control panel button appears to be stuck or held down
Minor
Usually easy to fix - may resolve on its own
Also displayed as: bC2 (no display during normal operation)
What This Means
Touch button physically stuck or defective; An object is resting on the touch button; Condensation on control panel connectors
What actually causes this:
Moisture from steam got into the control panel, making it think a button is being held down
First Thing to Check
Try pressing each button firmly once to unstick it — also wipe down the control panel to remove any moisture
Parts Involved
How to Fix
- 1
1. Check whether there is condensation on the PBA — check CN103 of Display Control Module connector and CON100 Touch Module connector
- 2
2. If condensation found, remove all moisture and dry thoroughly
- 3
3. Check that no objects are resting on the control panel buttons
- 4
4. If no condensation or obstruction, replace the Control Panel Assembly (Display Control Module, Touch Module, Sub Wire)
Other Error Codes for DDW24T999BB
The dishwasher cannot pump the dirty water out
The water inside the dishwasher got dangerously hot
The touch panel and the control board are not communicating properly
The drying fan is not spinning fast enough
The main wash pump that sprays water is not working properly
The heating element is not warming the water properly
Water is leaking inside the base of the dishwasher
The dishwasher's main computer board and display board cannot talk to each other