Error Code 5C1-5C5
The dishwasher has repeatedly failed to drain the water
Moderate
Address soon - your appliance may not work properly
Also displayed as: 5C
What This Means
A foreign object has entered the drain pump and the pump is stuck; The drain pump is out of order; The Main PBA is out of order; The Inverter PBA is out of order
What actually causes this:
Something is stuck in the drain pump, or the pump motor itself has failed
First Thing to Check
Check and clean the filter at the bottom of the dishwasher tub and inspect the drain hose for kinks
Parts Involved
How to Fix
- 1
1. Check the drain pump for foreign objects blocking the impeller
- 2
2. Check and reconnect the drain pump connector
- 3
3. Measure drain pump coil resistance (disconnect first) — normal: approximately 25 Ohm
- 4
4. Check drain hose for kinks or blockages
- 5
5. If pump tests normal, check the Main PBA and Inverter PBA
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
Other Error Codes for DW80K7050US
The heating element isn't warming the water properly
The control panel's buttons can't communicate with the control board
Water is leaking inside the base of the dishwasher
Too much water detected inside the dishwasher
The dishwasher isn't getting enough water
The dishwasher is having trouble draining water out
The water distribution motor can't find its correct position
The water temperature sensor isn't reading correctly