Error Code bC2
A control panel button appears to be stuck or pressed
Minor
Usually easy to fix - may resolve on its own
Also displayed as: No display (bC2 in recall)
What This Means
Touch button is out of order; An object is resting on the touch button; Condensation on CN103 of Display Control Module connector; Condensation on CON100 Touch Module connector
What actually causes this:
Moisture from steam got into the control panel, making it think a button is being held down
First Thing to Check
Wipe down the control panel to remove any moisture and make sure nothing is resting on the buttons
Parts Involved
How to Fix
- 1
1. Check whether there is condensation on the PBA — CN103 of Display Control Module connector and CON100 Touch Module connector. Normal: no condensation
- 2
2. If condensation found, remove all condensation and moisture thoroughly
- 3
3. If no condensation, replace the Control Panel Assembly (Display Control Module, Touch Module, Sub Wire)
Other Error Codes for DW80M9550USAA
The dishwasher's main computer and the display board can't talk to each other
The motor controller board inside the dishwasher stopped responding
Water is leaking inside the base of the dishwasher
Too much water detected inside the dishwasher
The water distribution motor that directs spray isn't working properly
The main wash pump that sprays water isn't working properly
The dishwasher door isn't fully closed
The automatic door-opening feature isn't working