Error Code bC2
A control panel button appears to be stuck
Minor
Usually easy to fix - may resolve on its own
Also displayed as: No display
What This Means
Touch button physically stuck or damaged; An object is resting on the touch button; Condensation on the control panel or Main PBA connectors; Sub PBA or touch button PBA defective
What actually causes this:
Moisture from steam got into the control panel, or something is resting on a button
First Thing to Check
Check if anything is pressing against the control panel — wipe down the panel to remove any moisture
Parts Involved
How to Fix
- 1
1. Check whether there is an object resting on the touch buttons
- 2
2. Check whether there is condensation on the Main PBA connector — remove all moisture
- 3
3. If no condensation, run the LED and Input Key test to verify button operation
- 4
4. If button tests fail, replace the control panel assembly (Sub PBA)
Other Error Codes for DW80T5040US
The heating element is not warming the water properly
The heating element isn't warming the water properly
The dishwasher's main control board and display board can't talk to each other
Water is leaking inside the base of the dishwasher
The automatic door opening feature isn't working
The water valve is letting small amounts of water in when it shouldn't be
The dishwasher can't drain the water out
Too much water detected inside the dishwasher