Error Code bE

Sensors do not detect that steam generator is full within 60 seconds

Also displayed as: bE

How to Fix

1. 1

   Check that the steam feeder drawer is filled with water to the MAX line.

2. 2

   Do not use distilled water — the water level sensor requires mineral content to operate.

3. 3

   Ensure the steam feeder is fully seated and the drawer is completely closed.

4. 4

   Turn the dryer off, refill the feeder to MAX, then restart the steam cycle.

5. 5

   If error persists after correct water level is confirmed: check water pump operation (see tE5 / Test 8).

6. 6

   If pump is defective: replace the DC water supply pump.

7. 7

   If pump is normal but error persists: replace the steam generator assembly.