Error Code tE2

Outlet thermistor open or shorted (second thermistor)

Also displayed as: tE2

How to Fix

1. 1

   Turn off the dryer power.

2. 2

   Remove connector NA6 from the controller.

3. 3

   Short pin 2 (Blue Wire) and pin 3 (Orange Wire) with a metal jumper.

4. 4

   If tE2 clears, verify NA6 and 6-pin connector are properly connected; if good, replace controller.

5. 5

   If tE2 persists, disconnect harness from thermistor assembly connector and measure resistance between terminals.

6. 6

   Compare measured resistance to Table 1; if out of range, replace thermistor.

7. 7

   If resistance is in range, check harness linking connector for damage and repair.