How do I fix error code d80 on a LG dryers?

1. undefined: Do not use dryer until exhaust system has been inspected and repaired. 2. undefined: Check outside dryer vent for strong airflow. 3. undefined: Inspect and clean entire duct run for lint buildup, kinks, crushes, or blockages. 4. undefined: Check vent hood for damage or clogging. 5. undefined: Repair or replace exhaust system as needed. 6. undefined: Shorten or straighten duct run if it is too long or has too many bends. 7. undefined: Retest using installation test (press Temp and Signal simultaneously after Power on) to verify airflow.

LG Dryers

Error Code d80

Ductwork approximately 80% blocked

Moderate

Address soon - your appliance may not work properly

Also displayed as: d80

How to Fix

1
Do not use dryer until exhaust system has been inspected and repaired.
2
Check outside dryer vent for strong airflow.
3
Inspect and clean entire duct run for lint buildup, kinks, crushes, or blockages.
4
Check vent hood for damage or clogging.
5
Repair or replace exhaust system as needed.
6
Shorten or straighten duct run if it is too long or has too many bends.
7
Retest using installation test (press Temp and Signal simultaneously after Power on) to verify airflow.

This Error Applies To

LG DLEX4370V Series Dryers

Service manual exact match: DLEX4370BService manual exact match: DLGX4371VService manual exact match: DLEX4370VService manual exact match: DLGX4371WService manual exact match: DLEX4370WService manual exact match: DLGX4371B

Related Error Codes

tE2

Outlet thermistor open or shorted (second thermistor)

Power supply wire connection wrong or loose (electric dryer)

NFC module open or shorted

tE4

Steam generator thermistor open or shorted

Power failure or incorrect power supply

NFC module wrong or unresponsive

d90

Ductwork approximately 90% blocked

tE1

Outlet thermistor open or shorted

Need more help with your LG dryers?