Error Code HS
Humidity sensor failure
Moderate
Address soon - your appliance may not work properly
Also displayed as: HS
How to Fix
- 1
Turn off the dryer and call for service.
- 2
Inspect electrode sensor connections in the filter housing area.
- 3
Measure resistance of electrode sensor; verify continuity to control harness.
- 4
Replace electrode sensor assembly if defective.
Other Error Codes for DLGX7801VE
FlowSense four-bar restriction detected — ductwork significantly restricted
EEPROM error — EEPROM operation is abnormal
Steam pump AD value below 10 — pump abnormal
Thermistor fault — blower housing thermistor open or shorted (alternate code)
Ductwork approximately 90% blocked — FlowSense alert
Power supply wiring connection error — wire connection wrong or loose (electric dryer only)
Steam generator thermistor open or shorted
Door switch abnormal — detected only in TEST MODE