Error Code E5
Steam pump AD value below 10 — pump abnormal
Moderate
Address soon - your appliance may not work properly
Also displayed as: E5
How to Fix
- 1
Access test mode and advance to the fourth press (Mist Valve test step).
- 2
If the AD value displayed is below 10, the pump is defective.
- 3
If AD value is 10 or higher, the pump is functioning normally.
- 4
Replace steam pump assembly if AD value is below 10.
- 5
Inspect water supply hose and inlet valve for flow restrictions before condemning pump.
Other Error Codes for DLGX7801WE
FlowSense four-bar restriction detected — ductwork significantly restricted
EEPROM error — EEPROM operation is abnormal
Humidity sensor failure
Thermistor fault — blower housing thermistor open or shorted (alternate code)
Ductwork approximately 90% blocked — FlowSense alert
Power supply wiring connection error — wire connection wrong or loose (electric dryer only)
Steam generator thermistor open or shorted
Door switch abnormal — detected only in TEST MODE