Error Code tE2
Compressor discharge pipe thermistor open or short circuit
Moderate
Address soon - your appliance may not work properly
Also displayed as: tE2
How to Fix
- 1
Check thermistor connector at main PCB — verify connector is fully seated and not damaged
- 2
Measure thermistor resistance: normal value is 10 kΩ ±1% at 25°C; replace thermistor if out of range (R code: C365)
- 3
If connector and thermistor are good, inspect and replace wire harness (R code: A190)
- 4
If harness is good, replace main PCB (R code: A160)
Other Error Codes for DLHC1455V
Restricted motor — motor fails to start after restart attempts
Wi-Fi module communication error — Wi-Fi module single product fault
Wi-Fi product not registered (normal behavior until registered) or Wi-Fi module error
Compressor discharge pipe thermistor open or short circuit
Drainage pump failure — water not draining properly
Door open detected during operation — machine restarts then stops
Compressor error — inverter compressor fault after restart attempts
Drum outlet thermistor open or short circuit