Error Code 9C1
Your dryer is getting the wrong voltage from the outlet
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: 9C1
What This Means
Power not supplied properly to the unit; Faulty PCB; Damaged wire harness; Low voltage from utility; Faulty outlet or wiring
What actually causes this:
The electrical outlet isn't providing the right power — could be a tripped breaker, loose plug, or wiring issue.
First Thing to Check
Check your electrical panel and make sure the dryer's breaker hasn't tripped — flip it fully off then back on.
Parts Involved
How to Fix
- 1
1. Check the PCB and wire harness for damage or loose connections
- 2
2. Verify power is being supplied properly to the dryer
- 3
3. Measure voltage at the outlet: should be 120V/240V (Electric) or 120V (Gas)
- 4
4. Check for blown fuse or tripped circuit breaker
- 5
5. If voltage is correct and wiring is intact, replace the PCB
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
Other Error Codes for DVE54R7600V
Your dryer's temperature sensor isn't reading correctly
Your dryer vent is clogged and needs cleaning
The dryer's internal parts aren't communicating properly
The door switch isn't working properly
A button on the control panel is stuck or shorted
A secondary temperature sensor is giving bad readings
The dryer's internal parts aren't communicating properly
The dryer thinks the door is open while running