Error Code FC
Your dryer is getting the wrong type of electrical power
Moderate
Address soon - your appliance may not work properly
Also displayed as: FC
What This Means
Not using regular power source frequency (not 60Hz); Invalid power frequency sensor circuit on PCB; Generator or inverter power supply with unstable frequency
What actually causes this:
The power supply frequency is outside the expected range — usually a generator or unstable power issue.
First Thing to Check
If you're running the dryer on a generator, try plugging it into a regular wall outlet instead.
Parts Involved
How to Fix
- 1
1. Check if you are using a regular power source frequency (60Hz)
- 2
2. Verify the power source is providing standard 60Hz
- 3
3. Check the power frequency sensor circuit on the main PCB
- 4
4. Test with known good 60Hz power source
Other Error Codes for DVE55CG7100DA3
Your dryer's temperature sensor isn't reading correctly
A secondary temperature sensor is giving bad readings
The door switch isn't working properly
The dryer thinks the door is open while running
Your dryer detected restricted airflow during a vent test
The dryer's internal parts aren't communicating properly
Your dryer vent is about 80% blocked
Your dryer is getting the wrong voltage from the outlet