Error Code dC
The dryer thinks the door is open while running
Moderate
Address soon - your appliance may not work properly
Also displayed as: dC
What This Means
Door not fully closed or latched; Door sensor unit is loose; Door sensor unit is shorted; Defective door switch
What actually causes this:
Door wasn't closed firmly, or the door switch has gone bad from normal wear.
First Thing to Check
Open and firmly close the door, then try starting it again.
Parts Involved
How to Fix
- 1
1. Close the door firmly and attempt to run the dryer again
- 2
2. Check if the door sensor unit is loose or has a short
- 3
3. Test door switch continuity in both open and closed positions
- 4
4. If door switch readings are incorrect, replace door switch
This Error Applies To
Samsung DV55CG7 Series Dryers
Related Error Codes
Your dryer's temperature sensor isn't reading correctly
A secondary temperature sensor is giving bad readings
The door switch isn't working properly
Your dryer is getting the wrong type of electrical power
The dryer's internal parts aren't communicating properly
Your dryer vent is about 80% blocked
Your dryer is getting the wrong voltage from the outlet
Your dryer isn't heating properly or is overheating