Error Code FC
Your dryer is getting the wrong type of electrical power
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: FC
What This Means
Faulty main control board (Main PBA); Faulty display board (SUB PBA); Damaged or loose wire harness between Main PBA and SUB PBA
What actually causes this:
The power supply frequency is outside the expected range — usually a generator or unstable power issue.
First Thing to Check
If you're running the dryer on a generator, try plugging it into a regular wall outlet instead.
Parts Involved
How to Fix
- 1
1. Check wire harness connection between Main PBA and SUB PBA for loose or damaged connectors
- 2
2. Inspect wire harness for pinched, cut, or corroded wires
- 3
3. If wiring is intact, replace SUB PBA first (more commonly at fault)
- 4
4. If error persists after SUB PBA replacement, replace Main PBA
Other Error Codes for DVG41A3000W
A button on the control panel is stuck or shorted
Your dryer isn't heating properly or is overheating
The door switch isn't working properly
Your dryer vent is about 80% blocked
Your dryer's temperature sensor isn't reading correctly
The dryer motor isn't spinning properly
Your dryer detected restricted airflow during a vent test
Your dryer vent is over 90% blocked — needs immediate cleaning