Error Code FC
Your dryer is getting the wrong type of electrical power
Moderate
Address soon - your appliance may not work properly
Also displayed as: FC
What This Means
Non-standard power source frequency (not 60Hz); Generator or inverter power supply with unstable frequency; Power frequency sensor circuit fault on PCB
What actually causes this:
The power supply frequency is outside the expected range — usually a generator or unstable power issue.
First Thing to Check
If you're running the dryer on a generator, try plugging it into a regular wall outlet instead.
Parts Involved
How to Fix
- 1
1. Verify the power source is providing standard 60Hz frequency
- 2
2. Check if dryer is connected to a generator or inverter — these may not provide stable 60Hz
- 3
3. Inspect the power frequency sensor circuit on the main PCB
- 4
4. Test with a known good 60Hz power source
Other Error Codes for DVG45T3200W
The dryer's internal parts aren't communicating properly
A secondary temperature sensor is giving bad readings
A button on the control panel is stuck or shorted
The door switch isn't working properly
Your dryer detected restricted airflow during a vent test
Your dryer isn't heating properly or is overheating
Your dryer vent is about 80% blocked
The dryer thinks the door is open while running