Error Code FC
Your dryer is getting the wrong type of electrical power
Moderate
Address soon - your appliance may not work properly
Also displayed as: FC
What This Means
Not using regular power source frequency (not 60Hz); Power frequency sense circuit fault on PCB; Generator or inverter power supply with unstable frequency
What actually causes this:
The power supply frequency is outside the expected range — usually a generator or unstable power issue.
First Thing to Check
If you're running the dryer on a generator, try plugging it into a regular wall outlet instead.
Parts Involved
How to Fix
- 1
1. Check if you are using regular power source frequencies (60Hz)
- 2
2. Verify the power source is providing standard 60Hz frequency using a multimeter
- 3
3. Check if dryer is connected to a generator or inverter
- 4
4. Check the power frequency sense circuit on the main PCB
- 5
5. Test with known good 60Hz power source
Other Error Codes for DVG45T3400V
The dryer thinks the door is open while running
The dryer's internal parts aren't communicating properly
Your dryer isn't heating properly or is overheating
Your dryer's temperature sensor isn't reading correctly
The dryer motor isn't spinning properly
Your dryer vent is about 80% blocked
A button on the control panel is stuck or shorted
Your dryer vent is clogged and needs cleaning