Name: Samsung DVG52M7750V
Brand: Samsung

Question 1

What does error code 3C mean on Samsung DVG52M7750V?

Accepted Answer

The dryer motor isn't spinning properly. Cause: Motor relay circuit on main PCB is faulty; Motor relay stuck open or closed; Wiring issue between main PCB and motor relay.

Question 2

What does error code 9C1 mean on Samsung DVG52M7750V?

Accepted Answer

Your dryer is getting the wrong voltage from the outlet. Cause: Improper power supply to dryer; Low or unstable voltage from utility; Faulty outlet or home wiring; Main PCB voltage sensing failure; Tripped circuit breaker or blown fuse in home panel.

Question 3

What does error code AC mean on Samsung DVG52M7750V?

Accepted Answer

The dryer's internal parts aren't communicating properly. Cause: Faulty Main PBA (main control board); Faulty Sub PBA (display board); Damaged or loose wire harness between Main PBA and Sub PBA; Corroded or pinched wiring in communication bus.

Question 4

What does error code dC mean on Samsung DVG52M7750V?

Accepted Answer

The dryer thinks the door is open while running. Cause: Door not fully closed or latched; Laundry caught in the door preventing full closure; Loose wire terminals in door sense circuit; Defective door switch.

Question 5

What does error code dF mean on Samsung DVG52M7750V?

Accepted Answer

The door switch isn't working properly. Cause: Defective door switch giving invalid readings; Loose wire terminals in door switch circuit; Damaged door switch wiring harness; Door switch installed in wrong orientation after repair.

Question 6

What does error code FC mean on Samsung DVG52M7750V?

Accepted Answer

Your dryer is getting the wrong type of electrical power. Cause: Power source not providing standard 60Hz frequency; Dryer connected to generator or inverter with unstable frequency output; Power frequency sense circuit fault on main PCB.

Question 7

What does error code HC mean on Samsung DVG52M7750V?

Accepted Answer

Your dryer isn't heating properly or is overheating. Cause: Clogged lint filter restricting airflow; Restricted exhaust vent system causing heat buildup; Thermistor malfunction reading incorrect temperature; Thermostat failure not cycling heater properly; Heater element malfunction.

Question 8

What does error code tC mean on Samsung DVG52M7750V?

Accepted Answer

Your dryer's temperature sensor isn't reading correctly. Cause: Clogged lint screen restricting airflow and causing abnormal temperature readings; Restricted vent system causing heat buildup affecting thermistor readings; Thermistor resistance out of range (open or shorted); Disconnected or damaged thermistor wiring harness.

Question 9

What does error code tC5 mean on Samsung DVG52M7750V?

Accepted Answer

A secondary temperature sensor is giving bad readings. Cause: Clogged lint screen restricting airflow; Restricted vent system affecting vent temperature sensor; Vent thermistor 2 resistance out of range (open or shorted); Disconnected or damaged vent thermistor wiring harness.

DVG52M7750V

Error Codes

On this page

Warranty

Samsung Support

Track your Samsung

Code	Meaning	Severity
3C	The dryer motor isn't spinning properly	Critical
9C1	Your dryer is getting the wrong voltage from the outlet	Critical
AC	The dryer's internal parts aren't communicating properly	Critical
dC	The dryer thinks the door is open while running	Moderate
dF	The door switch isn't working properly	Moderate
FC	Your dryer is getting the wrong type of electrical power	Moderate
HC	Your dryer isn't heating properly or is overheating	Critical
tC	Your dryer's temperature sensor isn't reading correctly	Moderate