Error Code ANC
The dryer's internal parts aren't communicating properly
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: ANC
What This Means
Faulty Main PCB; Faulty Sub/Display PCB; Damaged or loose wire harness between Main PCB and Sub PCB
What actually causes this:
A loose wire connection or a power surge disrupted communication between internal components.
First Thing to Check
Unplug the dryer for 2 minutes, then plug it back in — this resets the electronics.
Parts Involved
How to Fix
- 1
1. Check the PCB and wire harness connections between Main and Sub PCBs
- 2
2. Inspect wire harness for pinched, cut, or corroded wires
- 3
3. If wiring is intact, replace the PCB
- 4
4. If problem persists after PCB replacement, replace the other PCB
Other Error Codes for DVG54R7600C
Your dryer's temperature sensor isn't reading correctly
Your dryer vent is clogged and needs cleaning
The dryer's internal parts aren't communicating properly
The door switch isn't working properly
Your dryer is getting the wrong voltage from the outlet
A button on the control panel is stuck or shorted
A secondary temperature sensor is giving bad readings
The dryer thinks the door is open while running