Name: Samsung DVG55CG7100VA3
Brand: Samsung

Question 1

What does error code 9C1 mean on Samsung DVG55CG7100VA3?

Accepted Answer

Your dryer is getting the wrong voltage from the outlet. Cause: Not using regular power source (voltage out of range); Low voltage from utility; Faulty electrical outlet or wiring; PCB or wire harness problem.

Question 2

What does error code AC mean on Samsung DVG55CG7100VA3?

Accepted Answer

The dryer's internal parts aren't communicating properly. Cause: Faulty Main PBA (main control board); Faulty SUB PBA (display board); Damaged or loose wire harness between Main PBA and SUB PBA.

Question 3

What does error code C1 mean on Samsung DVG55CG7100VA3?

Accepted Answer

The vent blockage test found a problem with your exhaust. Cause: Items left inside the drum during vent blockage test; Dry sensor (moisture sensor) malfunction.

Question 4

What does error code C8 mean on Samsung DVG55CG7100VA3?

Accepted Answer

Your dryer vent is about 80% blocked. Cause: Lint buildup in exhaust duct; Partially crushed or kinked exhaust duct; Exhaust duct too long or too many elbows.

Question 5

What does error code C9 mean on Samsung DVG55CG7100VA3?

Accepted Answer

Your dryer vent is over 90% blocked — needs immediate cleaning. Cause: Severe lint buildup in exhaust duct; Completely blocked or crushed exhaust duct; Outside exhaust hood sealed or stuck closed.

Question 6

What does error code Ct mean on Samsung DVG55CG7100VA3?

Accepted Answer

Your dryer detected restricted airflow during a vent test. Cause: Ambient temperature too extreme for accurate vent test; Dryer recently run and still hot; Thermistor issue.

Question 7

What does error code dC mean on Samsung DVG55CG7100VA3?

Accepted Answer

The dryer thinks the door is open while running. Cause: Door not fully closed or latched; Door sensor unit is loose; Door sensor unit is shorted; Defective door switch.

Question 8

What does error code dF mean on Samsung DVG55CG7100VA3?

Accepted Answer

The door switch isn't working properly. Cause: Door sensor unit is loose; Door sensor unit is shorted; Defective door switch giving invalid/impossible state readings.

Question 9

What does error code FC mean on Samsung DVG55CG7100VA3?

Accepted Answer

Your dryer is getting the wrong type of electrical power. Cause: Not using regular power source frequency (not 60Hz); Invalid power frequency sensor circuit on PCB; Generator or inverter power supply with unstable frequency.

Question 10

What does error code HC mean on Samsung DVG55CG7100VA3?

Accepted Answer

Your dryer isn't heating properly or is overheating. Cause: Restricted vent system causing excessive heat buildup; Thermistor failure or out-of-range resistance; PCB malfunction; Heater malfunction; Motor or heater not working normally during Smart Install.

DVG55CG7100VA3

Error Codes

On this page

Warranty

Samsung Support

Track your Samsung

Code	Meaning	Severity
9C1	Your dryer is getting the wrong voltage from the outlet	Critical
AC	The dryer's internal parts aren't communicating properly	Critical
C1	The vent blockage test found a problem with your exhaust	Moderate
C8	Your dryer vent is about 80% blocked	Moderate
C9	Your dryer vent is over 90% blocked — needs immediate cleaning	Critical
Ct	Your dryer detected restricted airflow during a vent test	Moderate
dC	The dryer thinks the door is open while running	Moderate
dF	The door switch isn't working properly	Moderate