Error Code nE
Vario Error — vario cam position not properly detected
Moderate
Address soon - your appliance may not work properly
What This Means
Wiring connection to vario motor disconnected; Vario switch (S/W) not assembled properly; Vario motor not operating properly (resistance should be 4 kΩ ±5%)
How to Fix
- 1
Check wiring connection; reconnect if disconnected
- 2
Check if vario S/W is assembled properly; reassemble if not
- 3
Check vario motor resistance: should be 4 kΩ ±5%; replace vario motor if not
- 4
Check voltage between RL3 pin4 and NA4 pin2: should be 120V AC ±15%; replace main PCB if out of range
This Error Applies To
LG LDF5545ST Series Dishwashers
Related Error Codes
Drain Error — machine does not reach normal drain level (motor RPM not increasing or drain blocked)
EEPROM failure (displayed during test mode)
Heater Error — water not heated or tub overheated to over 194°F
Leakage Error — internal leakage detected by float switch in base
Bubble Error — oversudsing detected
Thermal Error — thermistor resistance output abnormal
NFC or Wi-Fi module failure (displayed during test mode POWER+START)
Motor Error — washing motor operating abnormally