Error Code tE2
Outlet thermistor open or shorted (Thermistor of blower housing) — shorted condition
Moderate
Address soon - your appliance may not work properly
Also displayed as: tE2
How to Fix
- 1
1. Turn off the dryer and call for service.
- 2
2. Enter diagnostic mode: tE2 indicates thermistor shorted.
- 3
3. Follow same thermistor resistance check procedure as tE1.
- 4
4. Compare resistance to temperature chart (same values as tE1).
- 5
5. If resistance does NOT match chart → separate harness from thermistor connector and re-check.
- 6
6. If out of range → Replace thermistor.
- 7
7. If in range → Check harness-linking connector for damage.
- 8
8. Also note: tE2 error displayed — replace the steam generator assembly if steam-related.
This Error Applies To
LG DLEX8900V Series Dryers
Related Error Codes
Steam generator thermistor open or shorted
Power failure / power supply error
Ductwork approximately 90% blocked — exhaust severely restricted
Water supply pump error — pump AD value less than 10 in test mode
Power supply problem
Ductwork approximately 95% blocked — exhaust critically restricted
Outlet thermistor open or shorted (Thermistor of blower housing)
Steam feeder water supply error — steam generator not filled within 60 seconds