Error Code F10

Door lock fail — door lock failure occurred while operating door lock motor during self-clean or lock-out mode

What This Means

Loose or disconnected wiring to lock motor or micro switch; Failed micro switch; Failed door locking motor (~2.6 kΩ normal); Failed Main PCB or Power PCB

How to Fix

1. 1

   Disconnect power

2. 2

   Check connections of micro switch and door locking motor wiring — reconnect any loose connections

3. 3

   Test micro switch: normally open type — door unlocked = continuity, door locked = infinite; if abnormal, replace micro switch

4. 4

   Test door locking motor resistance: normal ~2.6 kΩ; abnormal = infinite (open) or below 5Ω (shorted); if abnormal, replace door locking motor

5. 5

   If motor and switch are normal, check Main PCB CN1 and Power PCB CN4 looseness — reconnect if needed

6. 6

   If connections normal, replace Power PCB

This Error Applies To

LG LSIL6332FE Series Ovens & Ranges (2024) (2024–present)