Error Code F7
Convection fan motor error — convection fan operation cannot be detected for over 1 minute during convection operation
Moderate
Address soon - your appliance may not work properly
What This Means
Loose or disconnected convection motor wiring; Failed convection motor; Failed Main PCB or Power PCB
How to Fix
- 1
Unplug unit
- 2
Check convection motor connector — if loose or disconnected, reconnect or replace harness
- 3
Check connection of Power PCB CN4 and Main PCB CN1 — reconnect if abnormal
- 4
Measure convection motor resistance: Lo-COM normal ~30Ω ±10%, Hi-COM normal ~25Ω ±10%; if open (infinite) or shorted (below 5Ω), replace convection motor
- 5
If motor resistance is normal, replace Main PCB
- 6
If issue persists after Main PCB replacement, replace Power PCB
This Error Applies To
LG LSIL6332FE Series Ovens & Ranges (2024) (2024–present)
Related Error Codes
Right Communication Error — communication error at right inverter module
LR Top Sensor Open/Short — Left Rear induction cooktop top sensor is open or shorted
RF Top Sensor Open/Short — Right Front induction cooktop top sensor is open or shorted
Left IGBT Sensor Open/Short — Left inverter IGBT temperature sensor fault
Left Communication Error — communication error at left inverter module
Sensor open — oven thermistor circuit is open
Sensor short — oven thermistor circuit is shorted
Door lock fail — door lock failure occurred while operating door lock motor during self-clean or lock-out mode