Error Code E Id
Defect of freezer cubed ice maker tray sensor — short-circuit or disconnection
Moderate
Address soon - your appliance may not work properly
Also displayed as: E Id
How to Fix
- 1
Step 1: Check connector between Main PCB and freezer cubed ice maker sensor. Reconnect if loose.
- 2
Step 2: Measure resistance. If 0 ohms (short), replace sensor.
- 3
Step 3: If OL (open), check harness; replace sensor if harness is intact.
- 4
Step 4: Compare resistance to temperature table. Replace sensor if out of spec.
This Error Applies To
LG LF31S6360 Series Refrigerators
Related Error Codes
Defect of freezer defrost sensor — short-circuit or disconnection
Defect of room temperature (ambient) sensor — short-circuit or disconnection
Defect of humidity sensor — short-circuit or disconnection
Defect of Cubed Mini ice maker sensor — short-circuit or disconnection
Defect of freezer sensor — short-circuit or disconnection of freezer temperature sensor
Defect of refrigerator (fresh food) sensor — short-circuit or disconnection
Defect of pantry sensor — short-circuit or disconnection of pantry compartment sensor
Defect of ice-room sensor or ice maker sensor — short-circuit or disconnection