Error Code E iS
Defect of ice-room sensor or ice maker sensor — short-circuit or disconnection
Moderate
Address soon - your appliance may not work properly
Also displayed as: E iS
How to Fix
- 1
Step 1: Check connector between Main PCB and ice-room/ice-maker sensor. Reconnect if loose or disconnected.
- 2
Step 2: Measure resistance at CON3 10th Pin ~ 9th Pin. If 0 ohms (short), replace sensor.
- 3
Step 3: If OL (open), proceed to Step 6.
- 4
Step 4: Compare measured resistance to temperature/resistance table. If out of spec, replace sensor.
- 5
Step 5: If resistance is within spec, explain normal operation to customer.
- 6
Step 6: Check sensor harness continuity. If wiring intact but error persists, replace Main PCB. If wiring is broken, repair harness.
This Error Applies To
LG LF31S6360 Series Refrigerators
Related Error Codes
Defect of freezer defrost sensor — short-circuit or disconnection
Defect of room temperature (ambient) sensor — short-circuit or disconnection
Defect of humidity sensor — short-circuit or disconnection
Defect of freezer cubed ice maker tray sensor — short-circuit or disconnection
Defect of Cubed Mini ice maker sensor — short-circuit or disconnection
Defect of freezer sensor — short-circuit or disconnection of freezer temperature sensor
Defect of refrigerator (fresh food) sensor — short-circuit or disconnection
Defect of pantry sensor — short-circuit or disconnection of pantry compartment sensor