How do I fix error code It E on a LG refrigerators?

1. undefined: Press the Ice Maker TEST switch (hold for 3+ seconds) to initiate a test cycle. 2. undefined: Observe whether ice tray completes the full ejection sequence: feeler arm sensing → ice ejecting → tray returns horizontal → water supply. 3. undefined: If ice ejection motor does not operate: check Hall IC signal at MICOM pin P22. 4. undefined: If Hall IC signal does not change within 1 minute of motor start, motor or Hall IC is defective — replace ice maker assembly. 5. undefined: Check for mechanical binding in the gear train or ice ejection mechanism. 6. undefined: Verify water inlet valve (solenoid) operates during water supply phase. 7. undefined: If mechanical components are intact but control fails: replace ice maker unit.

LG Refrigerators

Error Code It E

Ice Maker Kit Defect

Moderate

Address soon - your appliance may not work properly

Also displayed as: It E

How to Fix

1
Press the Ice Maker TEST switch (hold for 3+ seconds) to initiate a test cycle.
2
Observe whether ice tray completes the full ejection sequence: feeler arm sensing → ice ejecting → tray returns horizontal → water supply.
3
If ice ejection motor does not operate: check Hall IC signal at MICOM pin P22.
4
If Hall IC signal does not change within 1 minute of motor start, motor or Hall IC is defective — replace ice maker assembly.
5
Check for mechanical binding in the gear train or ice ejection mechanism.
6
Verify water inlet valve (solenoid) operates during water supply phase.
7
If mechanical components are intact but control fails: replace ice maker unit.

This Error Applies To

LG LFCS22520B Series Refrigerators

Service manual exact match: LFCS22520BService manual exact match: LFCS22520SService manual exact match: LFCS22520WService manual exact match: LFNS22520S