How do I fix error code IS E on a LG refrigerators?

1. undefined: 1. Check for loose or disconnected connector between Main PCB and icing sensor (CON802 / CON101). 2. undefined: 2. If connector is loose, reconnect or repair and retest. 3. undefined: 3. Measure sensor resistance across CON101 1st Pin to 2nd Pin. 4. undefined: 4. If resistance is 0 ohm (short), replace the icing sensor. 5. undefined: 5. If resistance reads infinity/open, replace the refrigerator. 6. undefined: 6. If resistance is within table values, sensor is normal — explain to customer. 7. undefined: Note: IS E shown without user input indicates icing sensor fault. Within 3 hours of error, press Ice Plus and Freezer buttons simultaneously to view error.

LG Refrigerators

Error Code IS E

Icing Sensor Error

Moderate

Address soon - your appliance may not work properly

How to Fix

1
1. Check for loose or disconnected connector between Main PCB and icing sensor (CON802 / CON101).
2
2. If connector is loose, reconnect or repair and retest.
3
3. Measure sensor resistance across CON101 1st Pin to 2nd Pin.
4
4. If resistance is 0 ohm (short), replace the icing sensor.
5
5. If resistance reads infinity/open, replace the refrigerator.
6
6. If resistance is within table values, sensor is normal — explain to customer.
7
Note: IS E shown without user input indicates icing sensor fault. Within 3 hours of error, press Ice Plus and Freezer buttons simultaneously to view error.