Error Code E CS
Convertible (Pantry/Full Convert) Sensor Error — short or open circuit in the pantry drawer sensor
Moderate
Address soon - your appliance may not work properly
Also displayed as: E CS
How to Fix
- 1
Check for loose or disconnected connector between Main PCB and convertible sensor at CON4 pins 13~14.
- 2
If disconnected, reconnect or repair connector.
- 3
Measure sensor resistance at CON4 pins 13~14. If 0 ohm (short), replace the sensor.
- 4
If resistance is infinite/open, check sensor harness.
- 5
If harness is normal and resistance is still open, replace the sensor.
- 6
Verify resistance vs. temperature table. Replace sensor if out of range.
- 7
If all checks pass, explain normal operation to customer.
- 8
If sensor connection is faulty and cannot be repaired, replace the refrigerator main PCB.
This Error Applies To
LG LRMVS3006D Series Refrigerators (2020) (2020–present)
Related Error Codes
Freezer Sensor Error — short or open circuit in the freezer thermistor
Refrigerator Sensor Error — short or open circuit in the fresh food compartment thermistor
Freezer Defrost Sensor Error — short or open circuit in the freezer defrost sensor
Refrigerator Defrost Sensor Error — short or open circuit in the refrigerator defrost sensor
Humidity Sensor Error — short or open circuit in the humidity sensor
Room Temperature Sensor Error — short or open circuit in the ambient room temperature sensor
Icing Sensor Error — short or open circuit in the icing compartment (in-door icemaker) sensor
In-door Icemaker Kit Error — electrical system error (motor, gear, Hall IC, operation circuit) within in-door icemaker