Error Code E IS
Icing Sensor Error — short or open circuit in the icing compartment (in-door icemaker) sensor
Moderate
Address soon - your appliance may not work properly
Also displayed as: E IS
How to Fix
- 1
Check for loose or disconnected connector between Main PCB and icing sensor at CON5 pins 18~17.
- 2
If connector is loose, reconnect or repair the connector.
- 3
Measure sensor resistance at CON5 pins 18~17. If 0 ohm (short), replace the sensor.
- 4
If resistance is infinite/open, check sensor connection harness.
- 5
If sensor connection is normal and resistance is open, replace the sensor.
- 6
Verify resistance matches the temperature table. If discrepancy, replace the sensor.
- 7
If all checks pass, explain normal operation to customer.
- 8
If PCB output is suspect, replace the main PCB.
This Error Applies To
LG LRMVS3006D Series Refrigerators (2020) (2020–present)
Related Error Codes
Freezer Sensor Error — short or open circuit in the freezer thermistor
Refrigerator Sensor Error — short or open circuit in the fresh food compartment thermistor
Freezer Defrost Sensor Error — short or open circuit in the freezer defrost sensor
Refrigerator Defrost Sensor Error — short or open circuit in the refrigerator defrost sensor
Humidity Sensor Error — short or open circuit in the humidity sensor
Convertible (Pantry/Full Convert) Sensor Error — short or open circuit in the pantry drawer sensor
Room Temperature Sensor Error — short or open circuit in the ambient room temperature sensor
In-door Icemaker Kit Error — electrical system error (motor, gear, Hall IC, operation circuit) within in-door icemaker