Error Code nE
Wi-Fi Connection Error (LQC Test Mode only) — problem with connection between display PCB and Wi-Fi module.
Moderate
Address soon - your appliance may not work properly
What This Means
Display PCB to Wi-Fi module connection fault
How to Fix
- 1
Replace the Wi-Fi module / display PCB service part.
This Error Applies To
LG WM3460CW Series Washers (2019) (2019–present)
Related Error Codes
EEPROM Error — EEPROM on main board is out of order. Displayed only when START/PAUSE is first pressed in Load Test Mode.
Door Open Error (variant 2) — same cause and resolution as dE1.
Wi-Fi Module Error (LQC Test Mode only) — problem with Wi-Fi module itself.
Drain Error — machine has not fully drained within 10 minutes.
Overflow Error — water level frequency exceeds 21.3 kHz, indicating too much water in tub. Drain pump activates automatically when FE is displayed.
Locked Motor Error — motor stator or rotor fault, or motor harness disconnection.
Suds Error — washing machine detected excessive suds during operation.
Water Inlet Error — correct water level (24.6 kHz) not reached within 8 minutes after water is supplied, or preset water level not reached within 20 minutes.