Error Code Ed2
ezDispense Detergent Dispense Sensor Error
Moderate
Address soon - your appliance may not work properly
What This Means
Connector not well connected; Wire cut or damaged
How to Fix
- 1
Confirm Ed2/Ed4 ERROR is displayed
- 2
Check if connector is well connected - reconnect if not
- 3
Check if wire is well connected and not cut
- 4
If wire is damaged: replace module harness and min harness
- 5
If connector and wire OK: replace Sub PCB
This Error Applies To
LG WM6700H Series Washers (2022) (2022–present)
Related Error Codes
Pressure Sensor Error - water level sensor malfunction
Door Open Error - door not properly closed or locked
Unbalance Error - load is not evenly distributed in drum
Too much detergent causing excessive suds
ezDispense Softener Pump Error - softener injection pump failure
ezDispense Softener Dispense Sensor Error
ezDispense System Error - automatic detergent injection pump connector fault
Inlet Valve Error - water supply problem detected