Error Code IE
Water Supply Error - machine not filling with water within expected time
Moderate
Address soon - your appliance may not work properly
Also displayed as: IE
What This Means
Water tap closed or water supply off; Inlet valve filter clogged with foreign material; Faulty connector on valve or RD6 connector on PCBA; Inlet valve resistance out of range (should be 0.8-1.2 kOhm); Failed PCBA
How to Fix
- 1
Turn the water tap on
- 2
Clean or replace the inlet valve filter
- 3
Reconnect or repair the connector to RD6
- 4
Replace the PCBA if signal absent
- 5
Replace the inlet valve assembly if resistance is out of spec (0.8-1.2 kOhm)
This Error Applies To
LG WT5680H Series Washers (2013) (2013–present)
Related Error Codes
Unbalance Error - load detected as unevenly distributed during spin
Drain Error - machine unable to drain water within expected time
Over Flow Error - water level too high, overfill condition detected
Locked Motor Error - motor cannot rotate, hall sensor or motor fault
Door Lock Error - lid lock mechanism failing to lock
Motor Locked by Foreign Object - object caught between wash plate and inner basket
Door/Lid Error - lid lock not detecting closed and locked position
Thermistor Error - temperature sensor open or short circuit