Error Code PE
Pressure Sensor Error - water level sensor malfunction
Moderate
Address soon - your appliance may not work properly
Also displayed as: PE
What This Means
BL6 connector disconnected from pressure sensor; Pressure sensor resistance out of range; Air chamber or pressure tube clogged; Failed Main PCBA
How to Fix
- 1
If connector at BL6 is disconnected: Reconnect or repair the connector
- 2
If resistance is out of range (not 21-23 Ohm +/-10%): Replace the pressure switch
- 3
If air chamber or tube is clogged: Fix the air chamber and remove the foreign material
- 4
If all above check out: Replace the Main PCB Assembly
This Error Applies To
LG WT5680H Series Washers (2013) (2013–present)
Related Error Codes
Unbalance Error - load detected as unevenly distributed during spin
Drain Error - machine unable to drain water within expected time
Over Flow Error - water level too high, overfill condition detected
Locked Motor Error - motor cannot rotate, hall sensor or motor fault
Door Lock Error - lid lock mechanism failing to lock
Motor Locked by Foreign Object - object caught between wash plate and inner basket
Door/Lid Error - lid lock not detecting closed and locked position
Thermistor Error - temperature sensor open or short circuit