How do I fix error code IE on a LG washers?

1. undefined: Turn the water supply tap on 2. undefined: Clean or replace the inlet valve filter 3. undefined: Reconnect or repair the connector at RD6 4. undefined: Replace the PCBA if cold valve does not activate in test mode 5. undefined: Replace the inlet valve assembly if resistance is out of 0.8-1.2 kOhm range

LG Washers2015–present

Error Code IE

Q: What does error code IE mean on a LG washers?

Inlet Error - Water not filling or filling too slowly Water tap closed; Clogged inlet valve filter; Faulty connector on valve or RD6 on PCBA; Inlet valve resistance out of range; PCBA fault

Inlet Error - Water not filling or filling too slowly

Moderate

Address soon - your appliance may not work properly

Also displayed as: IE

What This Means

Water tap closed; Clogged inlet valve filter; Faulty connector on valve or RD6 on PCBA; Inlet valve resistance out of range; PCBA fault

How to Fix

1
Turn the water supply tap on
2
Clean or replace the inlet valve filter
3
Reconnect or repair the connector at RD6
4
Replace the PCBA if cold valve does not activate in test mode
5
Replace the inlet valve assembly if resistance is out of 0.8-1.2 kOhm range

This Error Applies To

LG WT7700H Series Washers (2015) (2015–present)

Service manual exact match: WT7700HKAService manual exact match: WT7700HWAService manual exact match: WT7700HVA

Related Error Codes

Door Lock Failure - Lid lock mechanism failed to lock

Drain Error - Water not draining

LE1

Motor Obstruction Error - Foreign object caught between wash plate and basket

Over Flow Error - Water level too high

Pressure Sensor Error - Water level pressure sensor fault

Door/Lid Lock Error - Lid lock failed to detect closed position

Unbalance Error - Load is unbalanced during spin

Thermistor Error - Water temperature sensor fault

Need more help with your LG washers?