Error Code AE
The water clarity sensor isn't working properly
Minor
Usually easy to fix - may resolve on its own
Also displayed as: AE
What This Means
Turbidity sensor defective; Turbidity sensor connector disconnected; Debris covering turbidity sensor; Main PBA defect
What actually causes this:
Film or food buildup on the water clarity sensor is giving it bad readings
First Thing to Check
Run an empty cycle with a dishwasher cleaner to clear any buildup inside
Parts Involved
How to Fix
- 1
1. Clean the turbidity sensor — it may be covered with food debris or buildup
- 2
2. Check and reconnect turbidity sensor connector
- 3
3. Run service inspection mode No.1 — turbidity is tested after water supply
- 4
4. If error persists after cleaning and reconnection, replace turbidity sensor
- 5
5. If sensor tests normal, replace Main PBA
This Error Applies To
Samsung DW80F600UT Series Dishwashers (2014) (2014–present)
Related Error Codes
The water temperature sensor isn't reading correctly
The heating element isn't warming the water
The incoming water is too hot for safe operation
The dishwasher can't detect enough water inside
The dishwasher isn't getting enough water
The dishwasher can't drain the water out
Too much water detected inside the dishwasher
Water is leaking inside the base of the dishwasher