Error Code OC
Too much water detected inside the dishwasher
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: OC
What This Means
The case brake fails to detect the pulse; The water valve is out of order (leaking water through when closed)
What actually causes this:
The water inlet valve isn't closing properly, allowing water to slowly leak in, or the overflow sensor is malfunctioning
First Thing to Check
Turn off the dishwasher and the water supply valve under the sink, then check for standing water in the tub
Parts Involved
How to Fix
- 1
1. Check the water inlet valve — ensure it closes fully when de-energized
- 2
2. Check the overflow sensor connector and wiring
- 3
3. Check the flow meter in the case brake assembly
- 4
4. Check for water leakage on top of the case sensor
- 5
5. If valve and sensor are normal, replace Main PBA
This Error Applies To
Samsung DW80K7050U Series Dishwashers (2016) (2016–present)
Related Error Codes
The dishwasher isn't getting enough water
The dishwasher is having trouble draining water out
The dishwasher has repeatedly failed to drain the water
The water distribution motor can't find its correct position
The water temperature sensor isn't reading correctly
The heating element isn't warming the water properly
The water inside the dishwasher has gotten dangerously hot
A control panel button appears to be stuck or held down