Error Code df
The door switch isn't working properly
Moderate
Address soon - your appliance may not work properly
Also displayed as: df
What This Means
Loose wire terminals in door sense circuit; Open wire terminals in door sense circuit; Defective door switch giving invalid readings
What actually causes this:
The switch that detects whether the door is open or closed has worn out or its connection came loose.
First Thing to Check
Open the door, check for anything stuck in the door latch area, then close it firmly and try again.
Parts Involved
How to Fix
- 1
1. Inspect wire terminals in the door sense circuit for loose or open connections
- 2
2. Test door switch: Door open — COM-NC (pins 1-3) should be < 1Ω, COM-NO (pins 1-2) should be ∞
- 3
3. Test door switch: Door closed — COM-NC (pins 1-3) should be ∞, COM-NO (pins 1-2) should be < 1Ω
- 4
4. If switch readings are inconsistent, replace door switch
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
This Error Applies To
Samsung DV435ETGJW Series Dryers (2024) (2024–present)
Related Error Codes
Your dryer is getting the wrong voltage from the outlet
A button on the control panel is stuck or shorted
The dryer's internal parts aren't communicating properly
The dryer's memory chip has a communication error
Your dryer's temperature sensor isn't reading correctly
The dryer thinks the door is open while running
Your dryer is getting the wrong type of electrical power
Your dryer isn't heating properly or is overheating