Error Code dE
The dryer thinks the door is open while running
Moderate
Address soon - your appliance may not work properly
Also displayed as: dE
What This Means
Door not fully closed or latched; Loose wire terminals in door sense circuit; Open wire terminals in door sense circuit; Defective door switch
What actually causes this:
Door wasn't closed firmly, or the door switch has gone bad from normal wear.
First Thing to Check
Open and firmly close the door, then try starting it again.
Parts Involved
How to Fix
- 1
1. Close the door firmly and attempt to run the dryer
- 2
2. Inspect wire terminals in the door sense circuit for loose or open connections
- 3
3. Test door switch: Door open (Off) — COM-NC (pins 1-3) should be < 1Ohm, COM-NO (pins 1-2) should be infinity
- 4
4. Test door switch: Door closed (On) — COM-NC (pins 1-3) should be infinity, COM-NO (pins 1-2) should be < 1Ohm
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
This Error Applies To
Samsung DV56H9 Series Dryers (2018) (2018–present)
Related Error Codes
Your dryer isn't heating properly or is overheating
Your dryer is getting the wrong type of electrical power
Your dryer's temperature sensor isn't reading correctly
A button on the control panel is stuck or shorted
The door switch isn't working properly
The dryer's memory chip has a communication error
The dryer's internal parts aren't communicating properly
Your dryer is getting the wrong voltage from the outlet