Error Code bC2
A button on the control panel is stuck or shorted
Moderate
Address soon - your appliance may not work properly
Also displayed as: bC2
What This Means
Display PCB loose connection; Display PCB shorted; Stuck or jammed button on control panel; Moisture or debris on control panel causing short
What actually causes this:
A button got stuck from moisture, spilled liquid, or just normal wear over time.
First Thing to Check
Press each button on the control panel a few times to see if any feel stuck or unresponsive.
Parts Involved
How to Fix
- 1
1. Check if any buttons on the control panel are stuck or jammed
- 2
2. Inspect the Display PCB for signs of damage, loose connections, or short circuit
- 3
3. Check wiring between control panel and Display PCB
- 4
4. If Display PCB is confirmed loose or shorted, reseat or replace Display PCB
This Error Applies To
Samsung DVE45T3200 Series Dryers (2020) (2020–present)
Related Error Codes
The dryer's internal parts aren't communicating properly
A secondary temperature sensor is giving bad readings
The door switch isn't working properly
Your dryer detected restricted airflow during a vent test
The vent blockage test found a problem with your exhaust
Your dryer is getting the wrong type of electrical power
Your dryer isn't heating properly or is overheating
Your dryer vent is about 80% blocked